FT-L

Electromagnetic Flow Meters are used to measure the volume flow of conductive liquids and slurry liquids in closed pipelines which are suitable for industries such as petrochemical, iron and steel metallurgy, water supply and drainage, water conservancy irrigation, water treatment, total environmental protection sewage control, electricity, papermaking, food etc. The electromagnetic flow meter uses the principle of electromagnetic induction to measure the flow of conductive fluid based on the electromotive force induced when the conductive fluid passes through an external magnetic field

Request Quote

Flow Transmitters

The FLOW state.

See What Sets Us Apart

Industry standard calibration and testing for higher accuracy
4-20 mA, RS-485
Electromagnetic, Remote

Technical Specifications

IP65
IP65 (IP68 Optional)
DN15-DN1000
DN6 - DN80, PN<4.0MPa
DN100 - DN150, PN<1.6MPa
DN200 – DN1000, PN<1.0MPa
DN1200 – DN2000, PN<0.6MPa
Chloroprene rubber (CR)
Polytetrafluoroethylene (PTFE/F4)
Fluorinated ethylene propylene (FEP/F46)
Teflon(PFA)
316L Stainless Steel, Hastelloy C, Hastelloy B, Ti, Ta, Pt
IP65/IP68
-25~180°C (-13~356°F)

Rubber liner: -20~60°C (-4~140°F)
High-temp rubber liner: -20~90°C (-4~194°F)
PTFE liner: -20~120°C (-4~248°F)
High-temp PTFE liner: -20~160°C (-4~320°F)
Polyurethane liner: -20~80°C (-4~176°F)
PFA: -20~180°C (-4~356°F)
RS-485
Current (4-20 mA), pulse, frequency, state switch
Measurement value ±0.5% (Flow speed > 1m/s)
Measurement value ±0.5% ±2mm/s (Flow speed <1m/s)
0.15%
100-240VAC, 50/60Hz, 22-26VDC
Max 15VA