MS-L
Magnetostrictive level gauges use the principle of magnetostriction to provide reliable measurement of industrial application. This technology is one of the most accurate and repeatable level technologies available in the market. With no requirements of scheduled maintenance and recalibration, it serves as the best instrument for difficult measurement applications – Product Level, Interface level and Temperature.
Magnetorestrictive Level Transmitters
For Pin-point Accuracy.
See What Sets Us Apart
-
Industry standard calibration and testing for higher accuracy
-
Rod (0-6m) or Cable (Max 20m)
-
Teflon/PTFE for Corrosive liquids
-
Explosion proof and SIL3 approved
Technical Specifications
-
Electronics: -40 to 80°C (-40 to 176°F)
Measuring Rod: -40 to 110°C (-40 to 230°F) -
Rod: 15-600 cm
Cable: Max 2000 cm
-
4-20 mA
0-5V, 0-10V
RS-485 -
0.05%FS
When range is less than 30 cm, error is less than 150μm -
±0.002%FS
-
50ppm/°C
-
≤50mA
-
24 VDC
-
≤20mV
-
Rod: Upper- 51mm, Lower- 36 mm(Can be adjusted as per requirement)
Cable: Upper- 300mm, Lower - 100mm -
4-20mA output: ≤500Ω
0-5V, 0-10V output: Min Controller Load ≥5kΩ -
0Cr18Ni, 1Cr18Ni9Ti Or Custom
-
1Cr18Ni9Ti
-
0Cr18Ni9, SS316, Nitrile
-
Shielded Cable ConnectionAviation Plug Connection
Terminal Connections -
Threaded, positioning ring, suspended or custom
-
IP65
Get in Touch with Us to Spec your MS-L
